Planning a slab, base, driveway or extension? The right concrete, delivered exactly when and how you need it, makes all the difference. This guide explains how our volumetric on-site mixing works, what to expect on delivery day, and why we’re your dedicated partner in concrete excellence. No overcharging or under supplying. No mess, no waste.
Why choose volumetric on-site mixing
For domestic and commercial projects, volumetric delivery gives you control and consistency:
- Exact amount for your project, batched on site
- Adjustable slump and mix as you pour
- Flexible switching between mixes for different pours
- Clean, efficient delivery with minimal site disruption
You will only pay for what you use, measured on the truck. No hidden extras. No mess, no waste.
What to expect on delivery day
Several practical steps help ensure a smooth, tidy, and efficient pour. Our friendly and experienced team will confirm access and set up safely, including chocks, a wash-out area, and any necessary signage. Before batching starts, they will check your forms, levels, and reinforcement. They will agree the initial slump with you and begin batching to suit the pour rate. As conditions change, such as heat, wind, or gradients, they will adjust the mix workability. Throughout the pour, they will maintain a steady pace so your team can place and finish without stress.
We plan time slots carefully and arrive ready to pour. You get reliable scheduling and a tidy finish.
Choosing the right mix for your project
Selecting the correct grade and workability is essential for durability and finish. Our team can advise on:
- Slabs and bases: versatile mixes with appropriate slump for easy placing and finishing
- Footings and foundations: higher strength mixes designed for structural performance
- Driveways and external slabs: air entrainment and fibres where needed for durability
- Toppings and screeds: controlled workability for thin sections and smooth finishing
- Specialist requirements: waterproofing admixtures, accelerators, retarders, and fibres
Tell us about your project, access, and finish and we will match the mix to your needs.
What do concreters handle on site?
The labour scope typically includes placing, levelling, tamping, floating, edging, jointing, and providing curing advice. To ensure an efficient pour, provide drawings, thickness, and access details in advance. Prepare the sub-base, formwork, and reinforcement before the truck arrives. Ensure there are clear routes for barrowing or arrange a pump if required. Have tools, mesh, and people ready so offload remains smooth and efficient. Our friendly, experienced crew will coordinate batching speed to suit your team.
How we plan and deliver
We confirm your mix, expected volume, and a precise time slot in advance. Our team arrives prepared to pour and communicates clearly throughout the job. On site, we adjust the slump to suit conditions and can switch mixes for a topping layer when required. Scheduling is reliable so your team can be ready at the agreed time. We work to professional standards to keep operations clean and tidy, and our experienced crew supports a smooth, efficient pour from start to finish.
Use our online calculator to estimate your volume, then get in touch to book. We will confirm your mix and schedule a precise delivery time. We are ready to pour when you are.
Practical tips for a smooth pour
- Measure carefully: Use our calculator, then allow a small contingency for uneven ground
- Prepare the base: A compacted sub-base and tight forms reduce overruns and save time
- Plan access: Clear wheelbarrow routes or arrange a pump if needed
- Be ready to pour: Have tools, mesh and people on site so offload is smooth and efficient
No hidden extras. No mess, no waste. Just a clean, accurate pour.
Aftercare and curing essentials
- Curing timeframe: Keep the surface damp or use a curing compound for at least 7 days to reduce shrinkage cracking and improve strength gain.
- Early protection: Prevent foot traffic for 24–48 hours and vehicle loads until the concrete reaches appropriate strength for your specification.
- Joints and edges: Cut control joints at appropriate spacings and depths to guide cracking. Protect arises with edging during finishing to reduce spalling.
- Weather adjustments: In hot, windy, or dry conditions, start curing immediately after finishing. In cold conditions, consider accelerators and insulating blankets to maintain temperature.
Use our online calculator, then request a quote to schedule your delivery. We can advise and schedule a precise time slot.